Edexcel GCSE Physics chapter 9: Topic 10: Electricity and circuits MCQs with answers

By Team Megalecture · Updated 22 Nov 2026

32 exam-style questions on Topic 10: Electricity and circuits, each with the answer and a short explanation. Ten of them are below to try. The chapter test draws ten fresh questions each time and is marked the moment you finish, with your score by topic.

32 questions · 3 topics · 10 per test

Test this chapter freeAll Edexcel GCSE Physics chapters

What chapter 9 covers

Ten Topic 10: Electricity and circuits questions with answers

Try each one, then open the answer. These ten stay the same; the test draws new ones every time.

1. The potential difference across a resistor is 6.0 V and the current through it is 0.25 A. What is its resistance?

  1. A
    1.5 Ω
  2. B
    0.042 Ω
  3. C
    6.25 Ω
  4. D
    24 Ω
Show answer

Answer: D. R = V ÷ I = 6.0 ÷ 0.25 = 24 Ω. Multiplying gives 1.5; dividing the wrong way round gives 0.042.

2. Which describes the UK mains electricity supply?

  1. A
    direct current, 50 Hz, about 230 V
  2. B
    alternating current, 50 Hz, about 230 V
  3. C
    alternating current, 230 Hz, about 50 V
  4. D
    alternating current, 60 Hz, about 120 V
Show answer

Answer: B. UK mains is an ac supply with a frequency of 50 Hz and a p.d. of about 230 V. A direct supply does not have a frequency.

3. A circuit symbol is a rectangle with a diagonal arrow drawn through it. Which component is this?

  1. A
    fixed resistor
  2. B
    variable resistor
  3. C
    light dependent resistor
  4. D
    thermistor
Show answer

Answer: B. An arrow through a resistor rectangle shows its resistance can be changed: a variable resistor. An LDR has two arrows pointing in towards it inside a circle.

4. A 10 Ω resistor and a 20 Ω resistor are connected in parallel. What can be said about their total resistance?

  1. A
    it is 30 Ω
  2. B
    it is 15 Ω
  3. C
    it is between 10 Ω and 20 Ω
  4. D
    it is less than 10 Ω
Show answer

Answer: D. Adding a resistor in parallel gives the current another path, so the total resistance falls below the smallest individual resistance (here it is about 6.7 Ω).

5. The current through a resistor at constant temperature is 0.30 A when the potential difference across it is 4.5 V. What is the current when the potential difference is 12 V?

  1. A
    0.11 A
  2. B
    0.80 A
  3. C
    0.30 A
  4. D
    3.6 A
Show answer

Answer: B. R = 4.5 ÷ 0.30 = 15 Ω, and it stays constant (ohmic conductor). I = V ÷ R = 12 ÷ 15 = 0.80 A. Current is directly proportional to p.d.

6. A student investigates how the resistance of a wire depends on its length. Which should be kept the same?

  1. A
    the length of the wire
  2. B
    the potential difference reading
  3. C
    the material and diameter of the wire
  4. D
    the resistance of the wire
Show answer

Answer: C. Length is the independent variable and resistance is the dependent variable. Material and thickness also affect resistance, so they must be controlled.

7. Two lamps are connected in series with a 6.0 V battery. The potential difference across one lamp is 2.5 V. What is the potential difference across the other lamp?

  1. A
    2.5 V
  2. B
    3.5 V
  3. C
    6.0 V
  4. D
    8.5 V
Show answer

Answer: B. In series the supply p.d. is shared: 6.0 − 2.5 = 3.5 V.

8. A 6.0 Ω resistor and a 4.0 Ω resistor are connected in separate parallel branches across a 12 V battery. What is the current through the battery?

  1. A
    1.2 A
  2. B
    2.0 A
  3. C
    5.0 A
  4. D
    3.0 A
Show answer

Answer: C. Each branch has the full 12 V across it: 12 ÷ 6.0 = 2.0 A and 12 ÷ 4.0 = 3.0 A. Total = 2.0 + 3.0 = 5.0 A. Treating them as series gives 1.2 A.

9. How should an ammeter and a voltmeter be connected to measure the current through a lamp and the potential difference across it?

  1. A
    ammeter in series with the lamp, voltmeter in parallel with the lamp
  2. B
    ammeter in parallel with the lamp, voltmeter in series with the lamp
  3. C
    both meters in series with the lamp
  4. D
    both meters in parallel with the lamp
Show answer

Answer: A. The ammeter must have the same current through it as the lamp (series). The voltmeter compares the potential on each side of the lamp (parallel).

10. Why can touching a live wire be dangerous even when the appliance's switch is open?

  1. A
    the neutral wire is at 230 V when the switch is open
  2. B
    the earth wire carries a large current when the switch is open
  3. C
    the body is at a much higher potential than the wire
  4. D
    the live wire is still at about 230 V, so current can flow through the body to earth
Show answer

Answer: D. Your body is at 0 V. Touching the live wire creates a large p.d. across you, so a current can flow through you to earth, causing an electric shock.

Start the chapter testAbout the Edexcel GCSE Physics test

Read the notes for this chapter

Ways to practise this chapter

Topic 10: Electricity and circuits: questions students ask

How many Topic 10: Electricity and circuits MCQs are there?

32, each with the answer and a short explanation, across 3 topics: Current, potential difference, resistance and I–V characteristics, Series and parallel circuits, Mains electricity, power and the National Grid. Every chapter test draws ten of them, so you can take it many times.

Is the Edexcel GCSE Physics chapter 9 test free?

Yes. The test, the answers and the explanations are free and need no sign-up. Sign in only if you want your scores kept across devices.

How is the chapter test marked?

The moment you press Finish: your score, the right answer and an explanation for every question, and the ones you got wrong saved in My mistakes to retry.

Keep going

← Chapter 8: Topic 9: Forces and their effectsChapter 10: Topic 11: Static electricity →All chaptersStuck? Ask a question