20 exam-style questions on Topic 4: Waves, each with the answer and a short explanation. Ten of them are below to try. The chapter test draws ten fresh questions each time and is marked the moment you finish, with your score by topic.
Transverse and longitudinal waves and wave properties10 questions
Reflection, sound and waves for detection and exploration10 questions
Ten Topic 4: Waves questions with answers
Try each one, then open the answer. These ten stay the same; the test draws new ones every time.
1. A ship sends a sonar pulse to the sea bed and receives the echo 0.80 s later. Sound travels at 1500 m/s in sea water. How deep is the water?
A
1200 m
B
300 m
C
600 m
D
1875 m
Show answer
Answer: C. Total distance = 1500 × 0.80 = 1200 m for the journey there and back. Depth = 1200 ÷ 2 = 600 m.
2. A radio wave has a wavelength of 1500 m and travels at 3.0 × 108 m/s. What is its frequency?
A
2.0 × 105 Hz
B
4.5 × 1011 Hz
C
5.0 × 10−6 Hz
D
2.0 × 108 Hz
Show answer
Answer: A. f = v ÷ λ = 3.0 × 108 ÷ 1500 = 2.0 × 105 Hz. Multiplying gives 4.5 × 1011.
3. How does the human ear detect sound?
A
sound waves are converted to light in the ear
B
the eardrum absorbs sound and turns it into heat
C
sound travels through the ear as transverse waves
D
sound waves make the eardrum and other parts of the ear vibrate, which causes the sensation of sound
Show answer
Answer: D. Sound waves cause the eardrum and small bones behind it to vibrate. This conversion only works over a limited frequency range, which limits human hearing.
4. In a ripple tank, 10 waves pass a point in 5.0 s. The distance across 5 complete wavelengths is 20 cm. What is the speed of the waves?
A
0.020 m/s
B
0.080 m/s
C
0.40 m/s
D
8.0 m/s
Show answer
Answer: B. f = 10 ÷ 5.0 = 2.0 Hz. λ = 20 cm ÷ 5 = 4.0 cm = 0.040 m. v = fλ = 2.0 × 0.040 = 0.080 m/s. Using 20 cm as one wavelength gives 0.40 m/s.
5. A wave reaches the boundary between two materials. What is meant by transmission?
A
the wave bounces back from the boundary
B
the wave's frequency changes
C
the wave's energy is transferred to the material, heating it
D
the wave passes through the material
Show answer
Answer: D. Transmission means the wave carries on through the new material. Bouncing back is reflection; energy taken in by the material is absorption.
6. A room with soft curtains and carpets has much less echo than an empty room with hard walls. Why?
A
soft materials absorb more of the sound energy, so less is reflected
B
soft materials make sound travel faster
C
soft materials increase the frequency of the sound
D
soft materials reflect all of the sound
Show answer
Answer: A. Soft furnishings absorb more of the sound, so less energy is reflected back as echoes. Hard, smooth surfaces reflect sound well.
7. What is the wavelength of a wave?
A
the distance from a crest to the next trough
B
the distance from the undisturbed position to a crest
C
the distance from a point on one wave to the equivalent point on the next wave
D
the distance the wave travels each second
Show answer
Answer: C. Wavelength is one full cycle, for example crest to crest. The distance travelled per second is the wave speed.
8. Ultrasound can detect a hidden crack inside a metal casting. How?
A
part of the ultrasound is reflected at the boundary with the crack, and the time for the echo shows the crack's depth
B
the crack absorbs the ultrasound and then gives out light
C
the ultrasound ionises the metal around the crack
D
the crack changes the speed of sound in the whole casting
Show answer
Answer: A. Ultrasound is partially reflected whenever it meets a boundary between two different media. Timing the echo gives the distance to the boundary.
9. An ultrasound pulse travels through body tissue at 1500 m/s. The echo from a boundary returns 40 × 10−6 s after the pulse was sent. How deep is the boundary?
A
6.0 cm
B
3.0 cm
C
60 cm
D
0.30 cm
Show answer
Answer: B. Distance travelled = 1500 × 40 × 10−6 = 0.060 m. The pulse goes there and back, so depth = 0.060 ÷ 2 = 0.030 m = 3.0 cm.
10. What is ultrasound?
A
sound waves with a frequency higher than 20 kHz
B
very loud sound waves
C
electromagnetic waves with a frequency just above visible light
D
sound waves with a frequency below 20 Hz
Show answer
Answer: A. Ultrasound is sound above the upper limit of human hearing, 20 kHz. Frequencies below 20 Hz are infrasound.
Chapter test. Ten questions from Topic 4: Waves, drawn fresh each time, about ten minutes.
Practice mode. The right answer and the explanation after every question, with no clock. Exam mode keeps the marks until the end and runs a timer.
Hints. One tap for a nudge, a second to remove two wrong options.
My mistakes. Every question you get wrong is kept, and leaves the list once you get it right.
Topic 4: Waves: questions students ask
How many Topic 4: Waves MCQs are there?
20, each with the answer and a short explanation, across 2 topics: Transverse and longitudinal waves and wave properties, Reflection, sound and waves for detection and exploration. Every chapter test draws ten of them, so you can take it many times.
Is the Edexcel GCSE Physics chapter 3 test free?
Yes. The test, the answers and the explanations are free and need no sign-up. Sign in only if you want your scores kept across devices.
How is the chapter test marked?
The moment you press Finish: your score, the right answer and an explanation for every question, and the ones you got wrong saved in My mistakes to retry.